Fluid ReservoirThis reservoir is meant for holding hydraulic pump fluid.How to Use:Periodically, check the fluid level in HPUWith the trim tabs completely retracted, the fluid level should be about 2"…
This reservoir is meant for holding hydraulic pump fluid.
How to Use:
Periodically, check the fluid level in HPU
With the trim tabs completely retracted, the fluid level should be about 2" from the bottom of the reservoir (approximately 22 ounces) refill, remove the Lexan cover and filler plug located at the front left-hand corner of the reservoir
Fill with any type of automatic transmission fluid (ATF) only
Brands running HPU with excess or a lack of fluid will not cause damage to the trim tab system
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
12x9 Performance Sport Tab SystemManufactured with heavy-gauge reinforced stainless steel and powerful hydraulic actuators. Performance Tabs combine strength, durability, and good looks to achieve...
Relay Module - 12VA Relay Module reduces voltage drop in Trim Tab Systems with longer wire runs. With the older trim tab controls, RT1000 and RS1000, the Relay Module also functions as an...
Dual Actuator Marine Hardware PackHigh quality dual actuator hardware kit. This hardware bag is required in order to install hydraulic dual actuator systems. Includes: additional pipe nipples and...
SA1200S ActuatorBennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge...
Actuator Lower HingeWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to...