Steering Systems

Type A Controller f/Boats with an Existing AutopliotNo need for additional drive units. The Intellisteer Wireless Controller is designed to be wired between a Course Computer and Autopilot DriveWhen the Intellisteer Wireless Controller is activated it...

Male Run T-Fitting - 3/8" x 3/8" Tube x 1/4" NPTTypical Application:Used to connect any 1/4 NPT Female port to our hosesSpecifications:1/4 NPT to 3/8 COMP FITTINGHelm side = 1/4 NPTHose side= 9/16 - 24 UNEF 2A

Nylon Tubing 3/8" OD - 50'Nylon tubing for Packaged Steering Systems up to 150hp

UC128TS / UC128-SVS Tilt Tube RodTilt tube rod for UC128TS / UC128-SVS Cylinder

UC128OBF Mounting HardwareMounting hardware for UC128TS Cylinder

UC128TS / UC128-SVS Tiller Bolt KitTiller Bolt Kit for UC128TS / UC128-SVS Cylinder

UC94 Mounting HardwareMounting hardware for UC94 Cylinder

UC94 Tiller Bolt KitTiller bolt kit for UC94 Cylinder

UC94 Spacer KitSpacer kit for UC94 Cylinder

Powertech Male Connector f/Autopilot to ORF HoseTypical Application:Used when connecting an Autopilot to Powertech System - Autopilot to ORF Hose

Powertech Bulkhead T-FittingTypical Application:T-Fitting used on bulkhead fittings or helm high pressure lines on powertech helm

90° 3/8 NI Plate Comp FittingTypical Application:90° fitting from bulkhead fitting to 3/8" compression hose Specifications:3/8 COMP FITTINGFitting Side =  9/16 - 24 UNEF 2BHose Side =  9/16 - 24 UNEF 2A

Brass Compression Nut w/Sleeve #61CA-6Typical Application:3/8" Compression Nut with ferrule for cut to length nylon tubingSpecifications:3/8 COMP NUTFitting Side = 9/16 - 24 UNEF 2BHose Side = 3/8 Compression Ferrule

1/4 NPT to 3/8 T-FittingTypical Application:Fitting used in the back of the previous version of the UP series helms before the boss fittingSpecifications:1/4 NPT to 3/8 COMP FITTINGHelm Side = 1/4 NPTHose Side = 9/16 - 24 UNEF 2A

Brass Plug w/O-Ring for PumpsTypical Application:Compensating line brass plug of the UP series helmsSpecifications:1/4 NPT PLUGHelm Side = 1/4 NPT

45° Adjustable Fitting for Back of UP Series HelmsTypical Application:Fitting for the back of the UP series helmsSpecifications:ORB, Size #6 to 3/8 COMP FITTINGHelm Side = 9/16 - 18 UNF 2AHose Side = 9/16 - 24 UNEF 2A

Zero Torque Rotary Steering HelmZero torque single cable steering helmT103ZT steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat

Tilt Rotary Steering HelmSingle cable steering helm - not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat

Fourtech 16' Mach Rotary Steering System w/Helm, Bezel & CableFeaturing the T91 high performance helm with a Planetary Gear Design,the Fourtech offers performace, flexibility and durability increased bytop quality materials and construction. Centered on...

Fourtech 13' Mach Rotary Steering System w/Helm, Bezel & CableFeaturing the T91 high performance helm with a Planetary Gear Design,the Fourtech offers performace, flexibility and durability increased bytop quality materials and construction. Centered on...

Fourtech 12' Mach Rotary Steering System w/Helm, Bezel & CableFeaturing the T91 high performance helm with a Planetary Gear Design,the Fourtech offers performace, flexibility and durability increased bytop quality materials and construction. Centered on...

Lube IILube II allows sticky, hard to move steering rods to be properly and easily lubricated for smooth, easy steering action.The system includes a stainless steel lubricating nut with an oil seal and a grease (zerk) fitting. This lubricator's unique...

Cable BuddyCable Buddy™ is a complete steering cable lubricant system.Seals moisture out, puts lubricant in. Prevents corrosion and freezing to -40°F (-40°C). Cable Buddy lubricates and virtually eliminates all wear in the inner cable,...

V-Throttle - 42018 H - for 0-5V interfaces (voltage)Throttle with analog voltage interfaceRedundant voltage input, IVS, PWM output.They supply the throttle electronic signal. Required for use with direct connection to electronic throttle on the engine...

Rudder Position IndicatorAwareness of the rudder angle is an important safety factor. This is especially true while moving in and out of your berth, drawing alongside another boat, picking up a skier, mooring, or any other "close call" situation. Davis'...

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 30 FeetFittings: ORFS Specifications:Cable Length (Feet): 30'Box Dimensions: 4"H x 14"W x...

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 26 FeetFittings: ORFS Specifications:Cable Length (Feet): 26'Box Dimensions: 5"H x 15"W x...

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 22 FeetFittings: ORFS Specifications:Cable Length (Feet): 22'Box Dimensions: 4"H x 14"W x...

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 16 FeetFittings: ORFS Specifications:Cable Length (Feet): 16'Box Dimensions: 4"H x 14"W x...

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 14 FeetFittings: 3/8 Compression Fitting Specifications:Cable Length (Feet): 14'Box Dimensions: 5"H...