Transducer Accessories

Heavy-Duty Transom Mount Bracket w/Spray ShieldMount the transducer on the transom of your boat so it remains in the water at all times to provide excellent sonar returns.  Bracket can be adjusted to allow the angle of the transducer to be parallel...

1M Adapter Cable with Male 9-Pin Navico Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Navico units.

1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with Garmin units.

1M Adapter Cable with Male 8-Pin Black Box Connector for Echonautics 300W, 600W & 1kW TransducersMix-n-match cable for use with SI-TEX NavPro units.

12-Pin XDR Extension Cable - 10MFeatures:Extension Cable For Furuno Transducer10M (33' Length)12-PinColor: BlackThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

10-Pin to 12-Pin Adapter Cable (0.4m) for TZT3Features:10-Pin to 12-Pin endsLength: 0.4mUsed specifically for Furuno's TZT3This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or...

Perspective Mount f/Livescope Plus LVS34The Perspective Mode Mount takes your LiveScope™ Plus real-time scanning sonar to the next level. Attach your LVS34 transducer to this mount to add an overhead sonar view that’s perfect for scouting...

Trolling Motor Barrel Mount f/Livescope Plus LVS34 Mount a compatible LiveScope™ transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and fits all barrel diameters, including those...

0 Degree Pole Mount f/Livescope Plus LVS34Position your LiveScope™ Plus LVS34 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too).

Transom Mount Bracket f/Livescope Plus LVS34Easily attach your compatible LiveScope™ transducer to the transom of your boat with this stainless steel mount.

Foulfree Transducer CoatingFormulated by industry-leading scientists and certified by Airmar for transducers.  Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns and positive fish targets.  It can also...

Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts).This product may not be returned to the original point of purchase. Please contact the manufacturer...

Transom Mount BracketEasily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds.

Trolling Motor Mount f/GT36 and GT56 Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy...

0 Degree Livescope Pole MountPosition your Panoptix LiveScope™ LVS32 transducer on this 0 degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too).

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have...

Raymarine 11-Pin High or Med Mix & Match Transducer CHIRP Cable for CP470 Airmar MMC-11R CHIRP Mix and Match Transducer Cable 1M Raymarine 11-Pin.For use with Airmar's High or Med Single Band Mix and Match CHIRP transducers up to 1kW (1,000...

Jack Plate Mount for RV-100 RealVision 3D TransducerThe Raymarine RV-100 Jack Plate Mounting Kit is the perfect accessory for mounting the RealVision 3D RV-100 transducer onto bass boats, flats boats and other shallow-draft, high-speed, outboard...

Trolling Motor MountEasily attach your compatible scanning transducer to the trolling motor of your boat. The low-profile design of the mount provides ultimate protection from underwater obstructions and easy mounting. WARNING: This product can expose...

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use...

Panoptix™ LiveScope™ LVS12 Trolling Motor Shaft MountMount a compatible Panoptix™ transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, including those on popular Minn Kota®...

Panoptix™ LiveScope™ LVS12 Transom Mount BracketMount a compatible Panoptix™ transducer on the transom of your boat with this kit.WARNING: This product can expose you to chemicals which are known to the State of California to cause...

Suction Cup Transducer AdapterUsing your fishfinder as a portable unit? Use this suction cup adapter to attach your transom mount transducer to the side of your boat. WARNING: This product can expose you to chemicals which are known to the State of...

Replacement Transom Mount Transducer BracketThis replacement bracket kit has everything you need to mount your transducer on the transom of your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause...

Panoptix LiveScope™ Transducer Extension Cable - 10' - 21-PinExtend the cable length of your compatible Panoptix™ transducer with this 10 ft (3 m) cable.Compatible Devices:Panoptix LiveScope™ SystemPanoptix™ LVS32...

Furuno 10-Pin Mix & Match Cable for High or Medium Frequency CHIRP TransducersFeatures:10-PinFor High or Medium Frequency CHIRP TransducersThis product may not be returned to the original point of purchase. Please contact the manufacturer directly...

MHX-HW MEGA Imaging Metal Transom Mount Bracket MEGA Imaging+ Metal Mounting Bracket allows adjustment of transducer angle. Durable, rugged metal construction ideal for transom-mount installations. Compatible Transducers: XM 9 HW MSI T, XM 9...

AD-MTM-HW-MSI MEGA SI+ Trolling Motor Adapter Bracket MEGA SI+ Trolling Motor Transducer Adapter Bracket converts a MEGA Side Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling...

AD-MTM-HW-MDI MEGA DI+ Trolling Motor Adapter Bracket MEGA DI+ Trolling Motor Transducer Adapter Bracket converts a MEGA Down Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling...

Transducer Support Arm The transducer support arm fits over the Vexilar rod holder.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more...